17 |
DIN 28417 |
真空技术 在恒压下用容积法测量流量
|
| |
|
Vacuum technology — measurement of throughput by the volumetric method at constant pressure |
18 |
DIN 28418-1 |
真空技术 真空计校准的标准方法 — 通过与一个参照的真空计直接比较的方法
|
| |
|
Vacuum technology — standard method for vacuum gauge calibration — by direct comparision with a reference vacuum gauge |
19 |
DIN 28418-2 |
真空技术 真空计校准的标准方法 — 通过与一个参照的真空计直接比较的方法 电离真空计
|
| |
|
Vacuum technology — standard method for vacuum gauge calibration — by direct comparision with a reference vacuum gauge, ionization vacuum gauge |
20 |
DIN 28418-3 |
真空技术 — 真空计校准的标准方法 — 通过与一个参照的真空计直接比较的方法 热传导真空计
|
| |
|
Vacuum technology — standard method for vacuum gauge calibration — by direct comparision with a reference vacuum gauge, thermal conductivity gauges |
21 |
DIN 28426-1 |
真空技术 — 低真空和中真空范围内的滑阀真空泵、旋片真空泵和往复真空泵的验收规范
|
| |
|
Vacuum technology — acceptance specifications for rotary plunger vacuum pumps, sliding vane rotary vacuum pumps and piston vacuum pumps for the tanges of rough and medium vacuum |
22 |
DIN 28426-2 |
真空技术 — 中真空范围内罗茨真空泵的验收规范
|
| |
|
Vacuum technology — acceptance specifications for roots vacuum pumps for therangeof medium vacuum |
23 |
DIN 28427 |
真空技术 — 泵液蒸汽压〈 1mbar 的扩散泵和扩散喷射泵的验收规范
|
| |
|
Vacuum technology — acceptance specifications for diffusions pumps and vapour jet vacuum pumps for vapour pressures of the pump fluid<1mbar |
24 |
DIN 28428 |
真空技术 — 涡轮分子泵的验收规范
|
| |
|
Vacuum technology — acceptance specifications for turbo molecular pumps |
25 |
DIN 28430 |
真空技术 — 使用水蒸汽作为工作液的蒸汽喷射真空泵和蒸汽喷射压缩机的测量规则
|
| |
|
Vacuum technology — rules for the measurement of steam jet vacuum pumps and steam jet compressors using steam as the working fluit |
26 |
DIN 28430 |
DIN 28430 勘误表
|
| |
|
Corrigenda to DIN 28430:1984-11 |
27 |
DIN 28431 |
真空技术 — 液环真空泵验收规范
|
| |
|
Vacuum technology — Acceptance specifications for liquid ring vacuum pumps |
28 |
DIN 28432 |
真空技术 — 隔膜真空泵验收规范
|
| |
|
Vacuum technology — Acceptance specifications for diaphragm vacuum pumps |
29 |
DIN 45635-13 |
压缩机、真空泵（包括活塞压缩机、透平压缩机）噪声测量 —— 用机械、表面发射传播的方法
|
| |
|
Measurement of airborne noise emitted by machines — enveloping surface method,compressors, vacuum pumpsincluded (displacement-, turbojet compressors)
|
30 |
DIN EN 1012-1 |
压缩机和真空泵 — 安全要求 — 第一部分 压缩机 |
| |
|
Compressors and vacuum pumps — safety requirements- Part 1: Compressors; German version EN 1012-1:1996 |
31 |
DIN EN 1012-2 |
压缩机和真空泵 — 安全要求 — 第二部分 真空泵 |
| |
|
Compressors and vacuum pumps — safety requirements- Part 2: Vacuum pumps; German version EN1012-2:1996 |
32 |
DIN EN ISO2151 |
压缩机和真空泵 — 噪声的测定 — 工程法（ 2 级） |
| |
|
Compressors and vakuum pumps-Determination of noise emission-Engineeringmethod ( grade 2 ) |
office@cnvacuum.org 
+86-24-24156799 Fax：+86-24-24156799