1 |
ISO 2151 |
声学 压缩机和真空泵测试规则 工程法（ 2 级）
|
| |
|
Acoustics — Noise test code for compressors and vacuum pumps -- Engineering method (grade 2) |
2 |
ISO 1607-1 |
容积真空泵性能测量方法 第一部分 体积流率（抽速）的测量
|
| |
|
Positive-displacement vacuum pumps — Measurement Of performance characteristics -- Part 1: Measurement of volume rate of flow(pumping speed) |
3 |
ISO 1607-2 |
容积真空泵性能测量方法 第二部分 极限压力的测量
|
| |
|
Positive-displacement vacuum pumps — Measurement of performance characteristics -- Part 2: Measurementof ultimate pressure |
4 |
ISO 1608-1 |
蒸汽流真空泵性能测量方法 第一部分 体积流率 ( 抽速 )的测量
|
| |
|
Vapour vacuum pumps — Measurement of performance characteristics -- Part 1: Measurement of volume rate of flow(pumping speed) |
5 |
ISO 1608-2 |
蒸汽流真空泵 性能测量方法 第二部分 临界前级压力的测量
|
| |
|
Vapour vacuum pumps — Measurement of performance
characteristics -- Part 2: measurement of critical backing pressure |
6 |
ISO-1609 |
真空技术 法兰尺寸
|
| |
|
Vacuum technology — Flange dimensions |
7 |
ISO 2151 |
声学 压缩机和真空泵测试规则 工程法（ 2 ） |
| |
|
Acoustics — Noise test code for compressors and vacuum pumps — Engineering method (grade 2) |
8 |
ISO 2861-1 |
真空技术 快卸连接器尺寸 第一部分：夹紧型
|
| |
|
Vacuum technology — Quick-release couplings dimensions — Part 1: Clamped type |
9 |
ISO 2861-2 |
真空技术 快卸连接器尺寸 第二部分：拧紧型
|
| |
|
Vacuum technology — Quick-release couplings
dimensions — Part 2: Screwed type |
10 |
ISO 3529-1 |
真空技术 词汇 第一部分：一般术语
|
| |
|
Vacuum technology — Vocabulary — Part 1: General terms |
11 |
ISO 3529-2 |
真空技术 词汇 第二部分：真空泵和相关术语
|
| |
|
Vacuum technology —Vocabulary — Part 2: Vacuum pumps and related terms |
12 |
ISO 3529-3 |
真空技术 词汇 第三部分：真空计
|
| |
|
Vacuum technology —Vocabulary — Part 3: Vacuum gauges |
13 |
ISO 3530 |
真空技术 质谱检漏仪校准
|
| |
|
Vacuum technology — Mass-spectrometer-type leak-detector calibration |
14 |
ISO/DIS 3556-1 |
溅射离子泵性能参数测量 第一部分：体积流率大于10 升/秒的泵
|
| |
|
Sputter-ion pumps — measurement of performance characteristics — part 1: pumps with a volume rate of flow greater than 10 l/s |
15 |
ISO 3669 |
真空技术 可烘烤法兰尺寸
|
| |
|
Vacuum technology — Bakable flanges — Dimensions |
16 |
ISO 3753 |
真空技术 图形符号
|
| |
|
Vacuum technology — Graphical symbols |
17 |
ISO 5302 |
真空技术 涡轮分子泵性能参数的测量
|
| |
|
Vacuum technology-Turbomolecular pumps- Measurement of performance characteristics |
18 |
ISO 9803 |
真空技术 管路配件 装配尺寸
|
| |
|
Vacuum technology — pipeline fittings — mounting
dimensions |
19 |
ISO/PDTS 3567 |
真空技术 真空计 与标准真空计直接比较校准:常规装置和程序
|
| |
|
Vacuum technology -- Vacuum gauge -- Calibration by direct comparison with a reference gauge: General set-up and procedure |
20 |
ISO/PDTS 3669 |
真空技术 可烘烤刀口法兰 尺寸
|
| |
|
Vacuum technology — Bakable knife-edge flanges — Dimensions |
21 |
ISO/FDIS 9803-1 |
真空技术 管路配件装配尺寸 第 1 部分 无刀口法兰型
|
| |
|
Vacuum technology-Mounting dimensions of pipeline fittings –Part1: Non knife-edge flange type |
22 |
ISO/FDIS 9803-2 |
真空技术 管路配件装配尺寸 第 2 部分 刀口法兰型
|
| |
|
Vacuum technology-Mounting dimensions of pipeline fittings --Part 2: Knife-edge flange type |
23 |
ISO/FDIS 21358 |
真空技术 直角阀 尺寸和对应气动传动装置的接口
|
| |
|
Vacuum technology -- Right-angle valve -- Dimensions and interfaces for pneumatic actuator |
24 |
ISO/FDIS 21360 |
真空技术 测量真空泵性能的标准方法 概述
|
| |
|
Vacuum technology -- Standard method for measuring vacuum-pump performance -- General description |
office@cnvacuum.org 
+86-24-24156799 Fax：+86-24-24156799